EPEVER MPPT Charge Controller 80 amp – 12V/24V/36V/48V Auto, Negative Ground MAX 200V 6000W Input Fit Lithium AGM Gel Flooded User Blacklight LCD Display Large-Amp(Tracer 8420AN)【Upgraded Version】Review
Advanced MPPT technologies & ultra-fast monitoring rate,with tracking efficiency no less than 99.5percent and MAX 200V 6000W Input.Accurately recognizing and tracking of multiple power stage to ensure DC/DC transfer efficiency is up to 98.6percent .Design Die Casting Aluminum to exude warmth. 12V/24V/36V/48V automatically identifying system voltage. Automobile control system to restrict the charging electricity & present go over the graded value.Common NEGATIVE Ground and Troubleshooting function(fault LED indicator). Solar control mppt 80a with higher quality & very low failure rate components of ST and Infineon and Battery temperature compensation function to ensure the controller's life. This 80a mppt solar charge controller compatible with 4 charging alternatives:Sealed, Gel, Flooded and User friendly (couldn't set Lithium). REAL-TIME energy statistics operate with multiple load management modes. Tracer AN series,Negative Ground Design control;12V/24V/36V/48V Vehicle differentiating system voltage,80 amp mppt controller. RS-485 communication bus port and Modbus communication protocol,available to meet various communication requirements in different scenarios. MSRT,realizing high conversion efficiency from the situation of reduced cost powe.
- High quality & low failure rate components of ST and Infineon to ensure the product's life.
- Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than
- 99.5%,Maximum DC/DC transfer efficiency is as high as 98.6%.
- Full load efficiency is up to 98% .
- Advanced MPPT control algorithm will minimize the MPP loss rate and loss time.
- The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP.
- The wider range of MPP operating voltage.
- Auto control system to limit the charging power & current go over the rated value.
- Battery temperature compensation function.
- Real-time energy recording and statistical function.
- Automatic over-temperature power reduction function.
- None
- ❶ [Upgraded Version] CE, ROHS, SGS CERTIFICATE Negative Ground Tracer AN series MPPT Controller Max Input Current: 80 amp; Max Input Solar Power: 1500W(12V); 3000W(24V); 4500W(36V); 6000W/(48V); Max input Voltage: 200V; with tracking efficiency no less than 99.5% (MSRT) and 12V/24V/36V/48V auto identifying system voltage. Accurately recognizing and tracking of multiple power point to ensure DC/DC transfer efficiency is up to 98.6%. Real-time energy recording and statistical.
- ❷ LED TROUBLESHOOTING INDICATORS and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. ☀ When the input power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. Common NEGATIVE Ground
- ❸This 80A mppt Charge Controller with high quality & low failure rate components of ST and Infineon and Battery temperature compensation function to ensure the controller’s life. It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Real-time energy recording and statistical.
- ❹ 80A mppt controller Fit 5 charging options: Lithium(need set with PC software), Sealed, Gel, Flooded and User. 4 type load Timer:ON/OFF mode,PV&Time control mode,PV voltage control mode,Dual Time control mode.